Check Points Before Repairing; Maintenance And Inspection; Cleaning - Konica Minolta PULSOX-300 Instruction Manual

Check Points before repairing

Before taking any actions, check the following points fi rst.
◆ If the abnormality continues to reappear, the instrument might
be faulty, so contact the nearest distributor or authorized service be faulty, so contact the nearest distributor or authorized service
facility.
�������
� �� �������
������� ����
��� ����� ��
������ ���
� �������
����������� ��
��� ������ ��
�������������

Maintenance and Inspection

• Before using the instrument, make sure that there is no dam-
age to the instrument, no damage or wire-breakage in the
probe cable and the instrument operates correctly and safely.

Cleaning

• Dampen a soft cloth with neutral detergent or water, wipe
the instrument with it, then wipe off carefully with a dry cloth.
In this way, make sure the instrument is cleaned and never
use solvent. When cleaning, take care not to touch the con-
nector terminals. Touching them may break terminal pins,
resulting in breakdown or damage.
22
����������
� �� ������� �����
����������
� �� ������� ��������
����������
� �� �� ����� ���������
�� ��� ������ �� ��
�� ����� ��������
�� ��� ������� ���
���� ���� � �������
�������������
Get other manuals https://www.bkmanuals.com
��������
� ���� ��� ����� ��� ���
������� ��� ������� ����������
���� ��� ����
� ���� ���� ���� ��� �������
��� �������� ���������
� ��� ���� ����� ��� ��������� ��
�� ����� �� ��������� �� ���
� � � � � � � � � � � � � � � � �
�������� �� ��� ������� ���
� � � � � � � � � � � � � � � �
������������� ��� ����� ��
������������� �������� ����
��������
����
����
����