Error Message - Sun Microsystems Ultra Enterprise 6000 Programming Manual

2.2 Error Message

UltraSPARC-Server System Flash PROM Update, Rev. 1.0
Bd# Board Type
=== ==========
00 CPU/Memory
01 I/O Type 1
06 CPU/Memory
The available "update" firmware revisions are:
CPU/Memory
I/O Type 1
I/O Type 2
FPROM Write Protected: Check Write Enable jumper or Front Panel Key switch.
Flash-update aborted.
ok
4. Type y and press Return when asked, Do you wish to update your
system's firmware and Are you sure .
See Figure 2-2. Your system will proceed to update all installed flash
PROMs. The system will normally reboot (autoboot) after programming has
completed.
If the system clock board flash PROM programming jumper is not manually
removed and you attempt to reprogram the flash PROMs, the system will
display an error message. See Figure 2-3.
Existing Firmware Revisions
===============================================================
OBP 3.0.7 1996/01/02 11:10
FCODE 1.5.0 1996/01/02 11:12
OBP 3.0.7 1996/01/02 11:10
OBP 3.0.8 1996/01/21 15:39
FCODE 1.6.0 1996/01/21 15:39
FCODE 1.6.0 1996/01/21 15:39
Figure 2-3 Flash PROM Programming Error Message
Reprogramming Flash PROMs
POST 2.3.5 1995/12/30 04:45
iPOST 1.1.3 1995/12/19 04:28
POST 2.3.5 1995/12/30 04:45
POST 2.4.2 1996/01/20 06:03
iPOST 1.1.2 1996/01/20 06:03
iPOST 1.1.2 1996/01/20 06:03
2
2-5