Technical Data - Electrolux EWC1352 User Manual

20 www.electrolux.com
Problem
You cannot open the
appliance door.
The appliance vi‐
brates/is noisy:
Spinning starts late
or appliance does not
spin:
No water is visible in
the drum:
After the check, activate the appliance.
The programme continues from the point
of interruption.
If the problem occurs again, contact the
Authorised Service Centre.

12. TECHNICAL DATA

Dimension
Electrical connection
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, except
where the low voltage equipment has no protection
against moisture
Water supply pressure
Water supply
Maximum Load
Spin Speed
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
Possible cause/Solution
• Make sure that a washing programme that ends with
water in tub, has not been selected.
• Set the drain or the spin programme if there is water in
the drum.
• Make sure that the washing programme is finished.
• Wait until the indicator light for door locked has gone
out.
• Make sure that the appliance receives electrical power.
• Make sure that transit bolts have been removed.
• Make sure that appliance is levelled correctly.
• Make sure that laundry is evenly distributed.
• Add more items, redistribute the load manually and then
select the spinning programme.
• Appliances based on modern technology operate very
economically using very little water without affecting per‐
formance.
Width/ Height/ Total depth
Voltage
Overall power
Fuse
Frequency
Minimum
Maximum
1)
Cotton
Maximum spin speed
The necessary data for the service
centre is on the rating plate.
50 cm /67 cm /55 cm
230 V
1600 W
10 A
50 Hz
IPX4
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Cold water
3 kg
1251 rpm