CONTENTS & INTRODUCTION CONTENTS Before using the hob SAFETY CLEANING I is r INSTALLATI N INST CTI NS TEC NICAL ATA CUST E CA E INTRODUCTION Thank you for buying this British- built appliance from us. BEFORE USING THE PRODUCT s i si r vi v r y...
Page 3
SAFETY GENERAL WARNING! - WARNING! - The Unattended cooking on appliance and its a hob with fat or oil can accessible parts become be dangerous and may hot during use. Care result in should be taken to avoid touching heating NEVER try to extinguish elements.
Page 4
SAFETY during use, as this will seriously affect the WARNING! - There is safety and performance, a risk of electric shock, particularly in relation so always make sure to surface temperatures you have turned off becoming hot and gas and unplugged your operated parts not appliance before starting.
Page 5
SAFETY electrical switch. on the hob surface since they can get hot. Contact your local gas supplier immediately. Ensure you switch off the appropriate cook ELECTRIC INDUCTION HOB zone individually or (by WARNING:- the central on/off key if Unattended cooking on a hob can be dangerous do not rely upon the NEVER try to extinguish...
Page 6
SAFETY fail-safe. The pacemaker Prolonged intensive use must be designed of the appliance may call in compliance with for additional ventilation, the appropriate for example opening regulations. of a window, or more effective ventilation, Caution: This appliance for example increasing is for cooking purposes the level of mechanical only.
Page 7
SAFETY the hob when you’re not damaged. around - take them off The glass ceramic can the cook zone if you get hot whilst cooking; have to leave the kitchen even though the cook even if you think it will zone itself does not only be for a moment, generate heat.
SAFETY This hob is not intended to be kitchen: opertated by means of a external Pull the plug out, or switch off the timer or seperate remote control power at the fuse box - this may be system. Fire Safety Advice or use a dry powder or carbon dioxide extinguisher distracted or leave things unattended, so...
USING THE HOB - ELECTRIC (CERAMIC) DUAL ZONE KEY DUAL ZONE KEY KEY 2 KEY 2 KEY 3 KEY 3 KEY 1 KEY 1 KEY 4 KEY 4 to respond to your touch. KEYLOCK Always ensure the touch control area is ON/OFF KEY clean, dry and free from any objects (e.g.
Page 10
USING THE HOB - ELECTRIC (CERAMIC) 6, To adjust the power setting follow will always start up with the Key Lock steps 3-5 above. activated. 7, Repeat the above as necessary for the Key Lock other zones. A Red Led indicates when the key lock is Note: During cooking, the elements will active, to deactivate/activate, touch the cycle on and off.
Page 11
USING THE HOB - ELECTRIC (CERAMIC) To operate the dual cook zone pausing of the cooking process, if the Pause key is touched for more than Select the appropriate cook zone and 120 milliseconds. set the power level as per the single Pause LED blinks, a pause sound is zone heard and the hob is stopped,...
Page 12
USING THE HOB - ELECTRIC (CERAMIC) Timer (All Cook Zones) Refered All 5 cooking zones can be operated under Timer zone the timer independently and at the same LED’s time for up to 99 minutes. When the set Timer adjust indicator time expires the timer will beep and the cook zone will switch off automatically.
ERROR CODES Appliance errors Event that generates the Effect in the Heater Display Description Normal status recovery error appliance (fore 0.5 sec./ back 0.5 sec) (Visualization Priority Order) Microcontroller Internal ‘F0’ Microcontroller fault App. off ------- Error ‘FA’ On/Off key emitter fault When the fault disappears Security Key Error App.
CLEANING ELECTRIC HOB Ceramic glass hobs Notes: The edge of the ceramic glass will It is recommended that you clean always appear to be a different colour and wash the hob surface before than the top surface due to the using for the time.
INSTALLATION General information between hob base and appliance must be maintained. Installation should only be carried out by Installation above an oven Please keep to the following points most Refer to the manufacturer’s instructions carefully; for clearances above the oven. Although every care has been taken to We recommend a 25mm gap between the ensure this appliance has no burrs, or...
INSTALLATION Clearances and dimension – require- There must be a minimum clearance of ments 50mm between the rear edge of the hob and the rear wall. This clearance must No shelf or overhang of combustible be maintained up to 650mm above the material should be closer than 650mm worktop.
Page 17
INSTALLATION Fitting into worktop Recessed Method Cut a hole in the work surface to the Recess the work top to the appropriate required size. The worktop must be of heat-resistant material or covered with heat-resistant material. to the installation bracket advice to deter- mine your installation type.
Page 18
INSTALLATION Installation Bracket Advice Installation pack 2 Secure the hob to the worktop by means 4 x Cranked installation bracket of the brackets provided, taking the thick- 4 x Spire clips (70/77/90cm appliances ness of the worktop into account. 4 x No8 Screws UNDERSIDE OF HOB Depending on your appliance the cranked INSTALLATION POSITIONS...
INSTALLATION CONNECT TO THE ELECTRICITY Remove the cable clamp screw and SUPPLY release the cable clamp retaining arm. WARNING: This appliance must be earthed. Only connect to the electrical Note; mains terminal with the power switched The cable clamp has a ratchet type off.
TECHNICAL DATA SUPPLY: 220 -240V ~ 50Hz 5.04kW - 8.2kW Refer to the data badge on the under side of your hob for power rating of your model This appliance conforms to European Directive 2009/125/EC regarding Eco design requirements for energy-related products...
Your guarantee Product Guarantee Details (UK only) Your appliance has the of a comprehensive manufacturer’s guarantee which covers the cost of breakdown repairs. (Details of which are shown on your Proof of Purchase Document). Any claim during the period of the guarantee (MUST BE ACCOMPANIED BY THE PROOF OF PURCHASE) o ov (The guarantee in no way affects your statutory or legal rights) What to do if you need to report a problem-...
Page 22
V1 05/12/2014 If supplied, please stick your self adhesive product rating plate here, or make a note of the product serial number below in the box below for future reference. Serial Number : ...................
Need help?
Do you have a question about the LAM1625 and is the answer not in the manual?
Questions and answers