15.6
Removing the headlight mask with the headlight
(XCF‑W)
Fuse 1 – 10 A – EFI control unit, lambda sensor, combi-
nation instrument, combination switch (optional), elec-
tronic fuel injection, diagnostics connector, fuel vapor
retention system, fuse 4
Fuse 2 - 10 A - low beam, position light, tail light
Fuse 3 - 10 A - radiator fan
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088005) (
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check the function of the electrical power consumer.
–
Close the fuse box cover.
Finishing work
–
Mount the seat. (
–
Detach the brake line and wiring harness from the headlight
mask.
–
Loosen rubber straps
swing it forward.
V01782-10
ELECTRICAL SYSTEM 15
A
p. 160)
p. 160)
p. 78)
1
. Slide the headlight mask up and
.
125