Table of Contents
Advertisement
Next steps
1. Replace the
SD memory card
2. Follow the procedure in
Battery
Lithium-ion battery precautions
CAUTION:
•
Exercise caution when handling Lithium-ion batteries.
•
Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting
the AC adapter from the system to allow the battery to drain.
•
Do not crush, drop, mutilate, or penetrate the battery with foreign objects.
•
Do not expose the battery to high temperatures, or disassemble battery packs and cells.
•
Do not apply pressure to the surface of the battery.
•
Do not bend the battery.
•
Do not use tools of any kind to pry on or against the battery.
•
Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or
damage to the battery and other system components.
•
If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing, bending,
or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical support for
assistance. See www.dell.com/contactdell.
•
Always purchase genuine batteries from
Removing the battery
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
Steps
1. Disconnect the battery cable from the system board.
20
Removing and installing components
after working inside your computer
www.dell.com
before working inside your computer
or authorized Dell partners and resellers.
Advertisement
Table of Contents
