Table of Contents
Advertisement
Available languages
Available languages
6 . G O O D V IBES ON L Y H EI GH T AD J UST MEN T
A large number of turntables can be accommodated in the Lx Studio.
The first stage is designed to accommodate turntables up to 100mm in height. The second
stage can accommodate a turntable up to 148 mm in height.
To change the height of the Good Vibes Only, follow these instructions:
1 / Remove the top plate with the springs (
2 / Pull the bottom plate towards the front of the speaker. (
3 / Adjust the base to the height of your record player. 2 different heights are available for the
bottom tray.
4 / Replace the springs in the space provided.
5 / Replace the top platter on the springs. (
6 / Install your turntable
1
2
26
Refer 1
)
Refer 2
)
Refer 3
)
3
7 . HO W TO CO NN EC T Y OU R TUR N T A BL E
1 / Get your power supply and your RCA cable.
2 / Pass the power supply and RCA cables through the spaces provided.
3 / Connect the output of your turntable to the RCA cable, earth to the GROUND PIN and your
turntable to the power supply provided using the adapter.
4 / YOUR PLATINUM IS PRE-AMPLIFIED (TRADITIONAL):
Select the RCA/PHONO button as the source on the control panel. Then move the comodo to
RCA.
4 / YOUR TURNTABLE IS NOT PRE-AMPLIFIED:
Select the RCA/PHONO button as the source on the control panel. Then move the comodo to
Phono.
27
Advertisement
Chapters
Table of Contents
