C H Argi Ng Through The Iec Pow Er Soc K Et; U S B C H A R G E R; C Ab Le Co Nn E Ct Io N - La Boite Concept LX Studio Notice/User Manual

On Mac

3 . C H ARGI NG THROUGH THE IEC POW ER SOC K ET

The LX Studio is equipped with an integrated IEC power socket located in the trap door, on the
right hand. Thanks to the C14 IEC universal adaptor provided, you will be able to plug in and
charge all your devices even when the LX Studio is asleep. However, if you turn off the LX Studio
using the master ON / OFF, there will no longer be power running through the IEC plug.
4 . US B C HA RGER
The LX Studio comes with a built-in-2-port USB charger. The ports will power your USB devices
even if the speaker is in standby mode. Powering off the LX Studio with the rear main switch will
also power off the USB ports.
The charger works with most USB compliant devices at 5V and can provide up to 2.4A for USB-A-charging
current (for fast iPad charging).
Note : Never use the charger with damaged cables as they could overheat and cause a fire.
USB-A charging current s limited to 15W. This is enough to charge most phones and tablets. The
charger is not compatible with the old iPod Classic (pre 2010)and other rare devices not fully
compatible with the USB standard.
24
On Windows

5 . C AB LE CO NN E CT IO N

OPTICAL: OPTICAL AUDIO DIGITAL INPUT
Use the optical input to connect your LX Studio to your TV, hard disk player, streaming player and
satellite or cable receiver. The optical input only works with PCM stereo, if a connected device
sends 5.1 audio (or similar surround sound), the LX Studio will not work. We recommend that you
use the optical input for the videos as this cable avoid the latency between image and sound.
To use this connection, you just have to :
1. Connect the optical audio cable to the optical audio input on your source.
2. Turn the LX Studio on.
3. Select Optical source by pushing the control knob.
RCA ANALOGUE INPUT
Use the RCA input for connecting your LX Studio to audio sources such as your mobile phone,
music player or tablet.
To use this connection, you need to :
1. Connect the audio cable provided to your LX Studio and to the audio output of your music
device (source).
2. Swap to RCA source by switching the button on the input panel.
3. Select RCA/Phono as source by pushing the Control knob until RCA/ Phono LED is illuminated.
AUXILIARY : 3.5 MM STEREO PLUG
Use the 3.5mm jack input to connect your LX Studio to audio sources such as your CD player or
turntable (pre-amplified).
To use this connection, you need to :
1. Connect the audio cable to your LX Studio and the audio output of your music device (source).
2. Select AUX as source by pushing the Control knob until the AUX LED is illuminated.
2 5