T Urn I N G T H E Power On/O F F; C Hoo Si N G Yo Ur S Ource - La Boite Concept LX Studio Notice/User Manual

2. T URN I N G T H E POWER ON/O F F

1. Insert the power cord into the power cable plug located under your LX Studio
the drawing on page 57).
2 . Place the power cord into the groove on the stands provided for this purpose.
3 . Connect the power cord to the wall socket.
4 . First, turn on the the LX Studio by switching the master ON/OFF at the back of the loud-
speaker (please refer to the drawing on page 57).
5. Then, turn the volume control knob clockwise to switch on the LX Studio. The Bluetooth LED
lights up.
20
6. The LX Studio will automatically go into standby mode if you leave your device without signal
for 30 minutes. The standby LED light will turn red. To wake up the device, press the control
(please refer to
knob or play music from either sources.
7. To temporarily put the LX Studio into "off" mode and avoid power consumption, turn the vol-
ume control knob counter clockwise to the "OFF" point until you hear a "click" sound.
8. To fully swith the LX Studio off, switch the master ON/OFF at the back of the loudspeaker
(please refer to the drawing on page 57).
disconnects.

3 . C HOO SI N G YO UR S OURCE

Once you have set up your connections on the input panel, you can select the source you want
to use by pressing the corresponding button on the control panel (from 1 to 7).
/ Selecting the source
/ Selecting the source
/ Selecting the source
/ Selecting the source
to connect your vinyl turntable. This source is linked to the RCA/Phono button located on the
input panel.
All the LED lights are now off and the USB power
.
corresponds to (1) the Bluetooth connection with your devices.
corresponds to (2) the Bluetooth pairing with your devices.
corresponds to (3) the AUX input.
corresponds to (4) the Phono or RCA inputs provided
RCA mode: for a line level input (CD, DVD, ...) or to use if
your turntable is pre-amplified.
RCA mode: to use with the cable with the two audio ends
(one RCA end and one stereo 3,5mm end) provided.
Phono mode: if your turntable is not pre-amplified (tradition-
al turntable with a ground output).
2 1