S A F E T Y I N F O R M A T I O N - La Boite Concept LX Studio Notice/User Manual

2 . S A F E T Y I N F O R M A T I O N

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Respect the safety principal of the biased plug or an earth type plug. A biased plug is
equipped with two pins, one larger than the other. An earth type plug has two pins and
a third of the earth type. The large pin or the third pin are provided for your safety. If the
provided pin is not adapted to your electrical wall power socket, call an electrician to
replace the obsolete electrical wall power socket.
10. Protect the power-supply cord from being stepped on or pinched, particular at plugs,
convenience receptacles and the point where they exit from the apparatus.
11. Only use attachments / accessories specified but the manufacturer.
12. Use the LX Studio only in its original base.
13. Unplug this apparatus during lightning storms or when unused for long period of time.
14. Have all maintenance work done by qualified, specialized personnel. Repairs are
required when the device has been damaged : power cord or plug damaged ; liquid
spilled on the device or if an object has fallen on it ; if it rains on the device or if it is wet
or damp ; if the device not normally operating ; or is the device has fallen.
WARNINGS
or wet sources. The unit is class 1 classified, and it must be connected to the electrical wall power
socket with an earth plug.
The unit must be installed so that it can be removed from the electrical network by means of the
earth plug (or with an adapted connector located on the rear side of the unit).
If the power plug is used as a disconnection device, the unit must be available and easy to use.
Only use the power cords supplied with the unit. We recommend not to place in a confined
space. Do not place the unit on a rug, or on a smooth surface, and do not obstruct the air holes,
the amplifier's radiator (blades), or the output screens.
The unit must not be used nearby water ; it must not be exposed to an evacuation source, or to
splashing, or to any other types of liquids. No object filled with water such as vases, should be
placed on the unit.
WARNING DISCLAIMER
the correct use of the product. The end user should carefully read the assembly guidelines before
setting up the product or consult a brand representative in case of any question. CCLAB La Boite
concept and its distributors cannot be held responsible in case of the product falling due to a
mounting that did not follow these guidelines.
WARNING
6 7
To reduce the risk of fire or electric discharge, do not expose the unit to rain
: the assembly of the LX Studio is a very important step for
The Lx Studio flap must be accompanied when closing.