Advertisement
7
Smart Plumb Compact Installation
Temperature & Pressure Relief Valve
Temperature & Pressure Relief Valve Pipework
Before placing the Smart Plumb Cylinder into position take note of the temperature and pressure relief
discharge pipe route options. There are left and right points on the Smart Plumb Compact casing to
exit the relief pipework.
To access and connect the pipe work follow guidelines listed below
Remove the Casing Front Panel
1. Remove the two lower screws
2. Slide front panel upwards slightly and open
carefully.
3. Disconnect the quick release coupler connect-
ing the main remote controller cable and the con-
trol board cable
62
www.jouleuk.co.uk | www.joule.ie
Advertisement
