Installing The Unit
Outdoor Unit Installation
The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level
and vibration. Particularly if the outdoor unit is to be installed in a location exposed to strong or at a
height, the unit must be fixed to an appropiate support (wall or ground).
Fix The Outdoor Unit With Anchor
Anchor Bolt Hole
620mm
940mm
• The anchor bolt must be 20mm or higher from the base surface.
• When tightening the anchor bolt, tighten the rubber washer to prevent outdoor
unit bolt connection part from corroding.
• Make a drain outlet around the base for outdoor unit drainage.
• If the outdoor unit is installed on the roof, you have to check the celing
strength and waterproof the unit.
Outdoor Unit Support
•
Ensure the wall will be able to suspend the weight of rack and outdoor unit.
•
Install the rack close to the column as much as possible.
•
Install proper grommet in order to reduce noise and residual vibration transferred by outdoor
unit towards wall.
22
www.jouleuk.co.uk | www.joule.ie
The anchor bolt must be 20mm
or higher from the base