Sensor Adjust; Remote Pairing Mode - Python 5606P Owner's Manual

if applicable).
Triggers Only: beeps will only be emitted for Full Trigger messages on
the 2-way remote control if applicable.
Car 2
Options: OFF, ON
The remote controls can control two systems independently. When set
to OFF, the Car Select feature is not available. When set to ON the
Car Select feature is enabled. See "Car Select" on page 27 for
details on using a remote with two systems.

Sensor Adjust

To avoid unintended alarm triggers; it is recommenced that an autho-
rized Directed dealer performs all sensor adjustments.

Remote Pairing Mode

The following instructions steps you through remote control pairing to
your system.
Prepare the remote for pairing:
Press and hold the
1.
will turn on, release the
Within 30 seconds press and hold the
2.
AUX
seconds, the transmit LED flashes then comes on, release the
button .
3. The remote is now ready for pairing.
Prepare the vehicle system for pairing:
Open at least one of the vehicle's doors.
1.
Turn the key to the ON position.
2.
16
AUX
button for eight seconds, the transmit LED
button.
AUX
AUX
AUX
© 2016 Directed. All rights reserved.
button for two
AUX