Python 5606P Owner's Manual page 21

3. Within five seconds press and release the Control Center button
one time.
Within five seconds, press and hold the Control Center button.
4.
The status LED will begin flashing and the siren will sound one
time to confirm the system is ready for pairing.
5. Release the Control Center button.
6. Press and release the
sound to confirm pairing.
To exit the Pairing Mode on the remote control, press the
7.
button once and then press and hold again, the transmit LED
will shut off to confirm exiting.
Pairing on the system will exit if:
• The open door is closed.
• The ignition is turned off.
• There is no activity for 60 seconds.
• The Control Center button is pressed too many times.
© 2016 Directed. All rights reserved.
button on the remote. The siren will
AUX
AUX
AUX
17