Auto Unlocking; Remote Beep - Python 5606P Owner's Manual

Note The remote control automatically exits the configuration
mode if no buttons are pressed within 30 seconds. Feature
changes are not saved if programming exits after this lapse.
Keypad Lock
Options: OFF, Auto
When OFF, the buttons do not lock and always perform a command
when pressed. When set to Auto, the remote buttons lock after a 20
second lapse between button presses to prevent unintentional opera-
tions.
Note If a button is pressed when locked, a fault tone plays as an
alert. To unlock the buttons, press the
by the

Auto Unlocking

After turning the ignition off, a message to the Responder LE will un-
lock the keypad buttons until the next command is performed. This
message can be turned off by an authorized Directed dealer, if Auto
Unlocking is not desired.

Remote Beep

Options: ON, OFF, Triggers Only
The Responder LE and companion remotes emit a beep as confirma-
tion of button presses and this also applies to command responses
and trigger alerts for the 2-way remote control.
When set to OFF, beeps are not emitted for any operations except
programming (including alarm triggers for the 2-way remote control
© 2016 Directed. All rights reserved.
button, tones are emitted to confirm unlocking.
AUX
AUX
AUX
button followed
15