Operating Notes; Standalone Modem Rear Panel Views; Stand-Alone Modem Rear Panel Views - Motorola 3260FAST User Manual

Operating Notes

This section summarizes useful operating information.

Standalone Modem Rear Panel Views

This section shows rear panel views for models 3260, 3261, 3265, and 3266.
Following each illustration is a list of the countries that use that modem version.
NOTE: For Models 3262, 3263, 3267 and 3268, the addendum, 326X Series Modem
Cards (shipped with the modem backplane), contains enclosure card and backplane
information.
C-12 Country-Specific Information
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
• Restricted front panel option settings do not appear in front panel menus
• PC software communication packages often send fixed initialization strings to
the modem (via AT commands). These strings do not account for country-
specific modem restrictions.
To make software communication package installation easier, the modem
responds as follows:
— If you enter a restricted AT, AT
completely restric
modem, does not, however, modify its configuration in this case.
IMPORTANT: The command does not change the modem
configuration. An OK lets the software package continue
communication with the modem. Some software packages may be
affected by this new functionality. Motorola recommends that you
change the initialization string of your software communication
package for the restricted options or option settings that may apply
in your country. Refer to the software package documentation for
further information.
— If you enter a restricted AT, AT
has some restricted settings, the modem displays ERROR
— If you enter a restricted V.25 bis command, the modem responds with the
INValid message, INV
, or AT& command for an option that is
*
ted, the m
odem displays OK instead of ERROR. The
, or AT& command for an option that
*