Speaker; Removing Speaker; Installing Speaker - Dell OptiPlex 5070 Micro Service Manual

Speaker

Removing speaker

1. Follow the procedure in
2. Remove the:
a. Side cover
b. Heat sink blower
3. To remove the speaker:
a. Release the speaker cable from the retention hooks on the heat sink blower [1].
b. Remove the two (M2.5x4) screws that secure the speaker to the heat sink blower [2].
c. Remove the speaker from the heat sink blower [3].

Installing speaker

1. To install the speaker:
a. Align the slots on the speaker with the slots on the heat sink blower [1].
b. Replace the two (M2.5X4) screws to secure the speaker to the heat sink blower [2].
c. Route the speaker cable through the retention hooks on the heat sink blower [3].
24 Removing and installing components
Before working inside your computer.