Processor; Removing Processor - Dell OptiPlex 5070 Micro Service Manual

Hide thumbs Also See for OptiPlex 5070 Micro:
Table of Contents

Advertisement

2. Install the:
a.
Heatsink fan
b.
2.5–inch hard drive assembly
c.
Side cover
3. Follow the procedure in

Processor

Removing processor

1. Follow the procedure in
2. Remove the:
a.
Side cover
b.
2.5 inch hard drive assembly
c.
Heat sink blower
d.
Heat sink
3. To remove the processor:
a. Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b. Lift the lever upward and lift the processor shield [2].
CAUTION:
The processor socket pins are fragile and can be permanently damaged. Be careful not to bend
the pins in the processor socket when removing the processor out of the socket.
c. Lift the processor out of the socket [3].
After working inside your
Before Working Inside Your
computer.
Computer.
Removing and installing components
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

D10u

Table of Contents