Table of Contents
Advertisement
10) Place the embers on the front of the burner tray in the
places shown on the photos below.
Separate platinum embers and place on the front burner
on and around the embers. Avoid stacking platinum em-
bers. Platinum embers may be placed over burner ports.
Separate Embaglow embers and place over platinum
embers.
Place embers in these 3 locations
on the burner tray.
02-75
02-50
918-067c
02-55
Page 4 of 4
02-51
Do not block the burner ports in this
area adjacent to the Log 02-54
IMPORTANT
When placing Embers, do not block burner ports as
this can cause an incorrect flame pattern, carbon
deposits and delayed ignition.
11) Test fire to ensure proper light off (make sure flame flows
smoothly from one end of burner to the other). If there is
any flame hesitation, check that area for any blockage of
the burner ports.
02-51
®
Regency
P36D-10 Zero Clearance Direct Vent Gas Fireplace
P36D / P90
installation
02-54
02-54
|
01/04/08
|
53
53
Advertisement
Table of Contents
