Cleaning, Maintenance, And Lubrication - Bauer 1996E-B Owner's Manual & Safety Instructions

1/2" heavy duty low speed spade handle drill / mixer

Hide thumbs Also See for 1996E-B:

Table of Contents

Maintenance and Servicing

procedures not specifically explained in this manual must

be performed only by a qualified technician.

tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:

Make sure that the trigger is in the off-position and unplug the tool from its

electrical outlet before performing any procedure in this section.

tO preVent SeriOuS inJury FrOM tOOL FaiLure:

Do not use damaged equipment. if abnormal noise or vibration

occurs, have the problem corrected before further use.

cleaning, Maintenance, and Lubrication

1. BeFOre eacH uSe, inspect the general

condition of the tool. Check for:

• loose hardware,

• misalignment or binding of moving parts,

• damaged cord/electrical wiring,

• cracked or broken parts, and

• any other condition that may

affect its safe operation.

Page 10

For technical questions, please call 1-888-866-5797.

2. aFter uSe, wipe external surfaces

of the tool with clean cloth.

3. Inspect the Chuck and remove any dirt or debris.

WarninG! tO preVent SeriOuS

inJury: if the supply cord of this power

tool is damaged, it must be replaced only

by a qualified service technician.

Item 56179

Table of Contents