Bauer 1642E-B Owner's Manual
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Drill
  5. 1642E-B
  6. Owner's manual

Bauer 1642E-B Owner's Manual

1" sds pro rotary hammer kit
Hide thumbs Also See for 1642E-B:
Table of Contents

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16j

Advertisement

Table of Contents
loading

Related Manuals for Bauer 1642E-B

Summary of Contents for Bauer 1642E-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Table of contents Safety ............2 Maintenance ..........11 Specifications ..........8 Parts List and Diagram ......14 Setup ............2 Warranty ............ 16 Operation ............ 9 WARNING SyMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

  • Page 3: Electrical Safety

    Electrical Safety 1. power tool plugs must match the outlet. 4. Do not abuse the cord. Never use the cord Never modify the plug in any way. for carrying, pulling or unplugging the Do not use any adapter plugs with grounded power tool.
  • Page 4 5. Maintain power tools. check for misalignment 7. Use the power tool, accessories and tool bits or binding of moving parts, breakage of parts etc. in accordance with these instructions, and any other condition that may affect the taking into account the working conditions power tool’s operation.

  • Page 5: Vibration Safety

    16. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
  • Page 6 Grounding TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING WIRE cONNEcTION: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.

  • Page 7: Extension Cords

    Extension cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.

  • Page 8: Specifications

    Specifications Electrical Rating 120VAC / 60Hz / 7.3A Rotational Speed 0-1150 RPM Impact Rate 0-5100 BPM Chuck Style 4003791 Setup - Before Use: Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14.

  • Page 9: Operation

    Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 10 changing SDS Type or SDS plus Type Drill Bits cAUTION! Wear heavy-duty work gloves when 3. Release the Chuck. inserting and removing drill bits. Drill bits become very 4. Check that the drill bit is secured in place. hot during use. Do not remove drill bits until the bit It should not be able to be pulled out of the Chuck.

  • Page 11: Maintenance

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 12: Troubleshooting

    Troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.
  • Page 13 pLEASE READ THE FOLLOWING cAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

  • Page 14: Parts List And Diagram

    parts List and Diagram parts List part Description part Description Front Cover Primary Gear Circlip Needle Bearing (K9x12x10) Chuck Swinging Rod Bearing Steel Ball Plate Steel Ball (SØ3) Steel Ball Intermediate Shaft Steel Ball Board Hammer Gear Clutch Spring Drill Gear Clutch Screw (ST4x90) Small Gear Screw (ST4x35)

  • Page 15: Assembly Diagram

    Assembly Diagram Item 63433 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents