Bauer 1996E-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Drill
  5. 1996E-B
  6. Owner's manual & safety instructions

Bauer 1996E-B Owner's Manual & Safety Instructions

1/2" heavy duty low speed spade handle drill / mixer
Hide thumbs Also See for 1996E-B:
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
1/2" HEAVY DUTY LOW SPEED
SPADE HANDLE
DRILL / MIXER
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
1996E-B
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23i
56179

Advertisement

Table of Contents
loading

Related Manuals for Bauer 1996E-B

Summary of Contents for Bauer 1996E-B

  • Page 1 Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 1996E-B 1/2" HEAVY DUTY LOW SPEED SPADE HANDLE DRILL / MIXER Visit our website at: http://www.harborfreight.com...

  • Page 2: Important Safety Information

    table of contents Safety ............2 Operation ............ 8 Specifications ..........7 Maintenance ..........10 Setup ............7 Warranty ............ 12 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 d. Do not abuse the cord. never use the cord i. Only use safety equipment that has been for carrying, pulling or unplugging the power approved by an appropriate standards agency. tool. Keep cord away from heat, oil, sharp Unapproved safety equipment may not provide edges or moving parts.
  • Page 4 d. Store idle power tools out of the reach of e. If the drill bit jams, release the children and do not allow persons unfamiliar Trigger immediately; drill torque with the power tool or these instructions can cause injury or break bit. to operate the power tool.

  • Page 5: Grounded Tools: Tools With Three Prong Plugs

    Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG Wire cOnnectiOn: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. never remove the grounding prong from the plug.

  • Page 6: Extension Cords

    extension cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.
  • Page 7 Specifications Electrical Rating 120V~ / 60Hz / 7.5A No Load Speed : 0‑600/min Chuck Capacity 1/16" to 1/2" (Ø13mm) Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 8: Bit Installation

    Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 9: Metal Drilling

    Drilling 1. Use firm pressure when drilling, but do not 2. Always drill in a straight line. Bending or press too hard. Too much pressure will not twisting bit while drilling may cause bit to bend help and will cause bit to overheat, may cause or break and may damage the workpiece.

  • Page 10: Cleaning, Maintenance, And Lubrication

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 11: Troubleshooting

    troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.
  • Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents