Bauer 1996E-B Owner's Manual & Safety Instructions page 7

Specifications
Setup - Before use:
read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn:
Make sure that the trigger is in the off-position and unplug the tool from its
electrical outlet before performing any procedure in this section.
assembly
1. Align Spade Handle Knob through the Spade
Handle into the Back Cover. Secure Spade
Handle Knob by turning clockwise until tight.
2. Thread Side Handle into Gear Housing by
turning clockwise until tight. There are three
optional positions: left, top, and right.
Functions
chuck Jaws
Item 56179
Electrical Rating
No Load Speed
Chuck Capacity
chuck
Direction
Switch
trigger
For technical questions, please call 1-888-866-5797.
120V~ / 60Hz / 7.5A
n : 0‑600/min
0
1/16" to 1/2" (Ø13mm)
note: Periodically check that handles remain tight.
Spade Handle
chuck Key
Side Handle
Page 7