Safety And Instructional Decals - Toro 30839N Operator's Manual

Maintenance and Storage
•
Before servicing or making adjustments, stop the engine
and remove the ignition key.
•
Ensure that the entire machine is properly maintained
and in good operating condition. Frequently check all
nuts, bolts, screws, and hydraulic fittings.
•
Make sure all hydraulic line connectors are tight and all
hydraulic hoses and lines are in good condition before
applying pressure to the system.
•
Keep your body and hands away from pin hole leaks or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, not your hands, to search for
leaks. Hydraulic fluid escaping under pressure can have
sufficient force to penetrate the skin and cause serious
injury. If fluid is injected into the skin it must be surgically
removed within a few hours by a doctor familiar with this
form of injury or gangrene may result.
•
Before disconnecting or performing any work on the
hydraulic system, all pressure in the system must be

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Explosion hazard—wear eye protection.
2. Caustic liquid/chemical burn hazard—to perform first aid,
flush with water.
3. Fire hazard—no fire, open flames, or smoking.
4. Poison hazard—keep children a safe distance from the
battery.
100-4837
93-7276
relieved by stopping the engine and lowering the cutting
units to the ground.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the cutting units, attachments, and
any moving parts. Keep everyone away.
•
Do not overspeed the engine by changing governor
settings. To ensure safety and accuracy, have an
Authorized Toro Distributor check the maximum engine
speed with a tachometer.
•
The engine must be shut off before checking the oil or
adding oil to the crankcase.
•
If major repairs are ever needed or if assistance is desired,
contact an Authorized Toro Distributor.
•
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts
and accessories made by other manufacturers could be
dangerous, and such use could void the product warranty.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 85-110 ft-lb (115-149 N-m).
1. Cutting/dismemberment—hazard, fan-stay away from
moving parts.
7
93-7818
93-6681