Cleaning And Servicing - Siemens ET6 LNV1 Series User Manual And Installation Instructions

Hide thumbs Also See for ET6 LNV1 Series:
Table of Contents

Advertisement

en Cleaning and servicing
Switching off the fan
Select the fan setting 0 on the control panel.
Switching on automatic mode
Press and hold
until the display shows ⁠ .
a The fan will start automatically when steam is pro-
duced.
Switching off automatic mode
Press and hold
until
16.5 Overview of the hood control settings
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob
or individual cooking zones are switched on or off.
Setting
Selection
Connection between hob and extractor hood
– Not connected/disconnected
– No function
– Connected to WLAN home network (Wi-Fi)
– Connected to WLAN and extractor hood
Automatic fan start-up
– Switched off. The extractor hood must be
switched on manually, if required.
– Switched on in automatic mode
mode, the extractor hood switches itself on when
one of the cooking zones is switched on.
– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
Fan run-on
– Fan switches off when the hob is switched off.
– Switched on in automatic mode
– Switched on with standard fan run-on
– No change to the settings
Switching the light on automatically
– Switched off
– Switched on
The light switches itself on when the hob is
switched on.
Switching the light off automatically
– Switched off
– The light switches itself off when the hob is
switched off.
1
Factory setting (may vary according to model)
17  Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
17.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, the online shop or a
retailer.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Never use unsuitable cleaning products.
16
goes out.
1
. In automatic
1
1
1
Automatic mode will also end if you select a differ-
ent fan setting.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
To switch the lighting on, touch
1.
To switch the lighting off, touch
2.
Description
-
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
Setting for whether and how the fan is to run on
after switching off the hob.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
Unsuitable cleaning products
¡ Undiluted detergent
¡ Detergent intended for dishwashers
¡ Abrasive cleaners
¡ Aggressive cleaning products such as oven spray
or stain remover
¡ Abrasive sponges
¡ High-pressure or steam jet cleaners
⁠ .
again.

Advertisement

Table of Contents
loading

Table of Contents