Hardware List of Twin Daybed IMAGE DESCRIPTION Part SKU# 1992T-1(4) Bolt and nut M8*80mm 1992T-2(4) Bolts M8*20mm 1992T-3(4) Dowel Ø8*40mm 1992T-4(14) Screws 8#*30mm 1992T-5(1) Allen key 60*22*4mm Note: Screwdriver will be prepared by yourshelf. THE HARDWARE IS LOCATED IN THE PACKING ITEM NOTE: MUST TIGHTEN SCREWS PERIODIACLLY.
Page 5
STEP 1: Inserting the dowel (3) into the respective holes at Back (A) Assemble Side End (C), (D) to Back (A) by Bolt+nut (1) Distinguishing the Ends (C), (D). Before assembly: Move the nut out 1=4 Pcs 3=4 Pcs...
Page 6
STEP 2: Attaching Bolt (5) to Pre-holes on Side End (C) and (D). Connecting the hook on Rail (B) to Bolt (5) and fasten. Pay attention to rail orientation. 2=4 Pcs...
Page 7
STEP 3: Please fasten slats (E) by screw (4) into corresponding holes. 4=14 Pcs That's it ! You've finished assembling your item. Thank you!