Living Spaces 17C212A-W-LS-3D Assembly Instruction

Hayes outdoor banquette laf sofa

HAYES OUTDOOR BANQUETTE LAF SOFA

REF

PART NAME

SEAT

LEG

WASHER

Step 1: Remove protective wrapping and lay all parts on floor. Make sure all parts

packed in Carton against attached parts list to make sure all parts are presented.

Step 2: Place a protective soft Material on floor.Lay seat (A) upside down on floor,

the bottom is facing up.

Step 3: Attach Leg (B) to the bottom as shown in Diagram, using Bolt (D )

and Washer (C).

Step 4: After all bolts are aligned properly before tightening. With a second person's

Assistance carefully turn the Sofa over onto its legs. Make sure legs rest on a flat

surface.

NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE

ASSEMBLED AND TIGHTENED PROPERLY AND SECURELY.

17C212A-W-LS-3D

Assembly Instruction

QTY REF

PART IMAGE

PART NAME

BOLT

(M6*35L)

ALLEN WRENCH

PART IMAGE

QTY

Table of Contents

Need help?

Do you have a question about the 17C212A-W-LS-3D and is the answer not in the manual?

Page 1 HAYES OUTDOOR BANQUETTE LAF SOFA 17C212A-W-LS-3D Assembly Instruction Parts List: QTY REF PART NAME PART IMAGE PART NAME PART IMAGE BOLT SEAT (M6*35L) ALLEN WRENCH WASHER Diagram: Assembly Steps:　　 Step 1: Remove protective wrapping and lay all parts on floor. Make sure all parts packed in Carton against attached parts list to make sure all parts are presented.
Page 2 HAYES OUTDOOR BANQUETTE RAF SOFA 17C212A-W-RS-3D-KD Assembly Instruction Parts List: PART NAME PART IMAGE QTY REF PART NAME PART IMAGE SEAT ALLEN WRENCH BOLT (M6*45L) WASHER ARMREST BOLT (M6*35L) Diagram: Assembly Steps:　　 Step 1: Remove protective wrapping and lay all parts on floor. Indentify all parts packed in Carton against attached parts list to make sure all parts are presented.