Related Manuals for Living Spaces LUCA Y2103W-348
Summary of Contents for Living Spaces LUCA Y2103W-348
- Page 1 ASSEMBLY INSTRUCTIONS LUCA PANEL/BUNK/DAYBED TRUNDLE SKU: 314671 ITEM NO: Y2103W-348 314583 Y2103B-348 314627 Y2103G-348 15 min...
-
Page 2: Part List
Part list PART SKU# IMAGE DESCRIPTION 1996-A-W: (White) 1996-A-B: (Blue) Front 1996-A-G: (Grey) 1996-B-W: (White) 1996-B-B: (Blue) Back rail 1996-B-G: (Grey) 1996-C-W: (White) 1996-C-B: (Blue) Side rails 1996-C-G: (Grey) Slats 1996-D... -
Page 3: Cleaning Instructions
Hardware List of Luca Trundle IMAGE DESCRIPTION Part SKU# 1996-1(8) Bolt and nut M8*70mm 1996-2(2) Bolts M4*20mm 1996-3(4) Dowel Ø8*40mm 1996-4(14) Screws 8#*30mm 1996-5(1) Handle 1996-6(1) Allen key 60*22*4mm Note: Screwdriver will be prepared by yourshelf. THE HARDWARE IS LOCATED IN THE PACKING ITEM NOTE: MUST TIGHTEN SCREWS PERIODIACLLY. -
Page 4: Detail View
Detail view... - Page 5 STEP 1: Firstly, please locate Side Rail (C) to Front (A), Back (B) Before assembly: Move the nut out by dowel (3) . Fasten Side Rail (C) by (Bolt+nut) (1). 1=8 Pcs 3=4 Pcs STEP 2: Please fasten slats (D) by screw (4) into corresponding holes. 4=14 Pcs...
- Page 6 STEP 3: Assemble the handle (5) into Front (A) 2=2 Pcs 5=1 Pc That's it ! You've finished assembling your item. Thank you!
- Page 7 ASSEMBLY INSTRUCTIONS LUCA TWIN PANEL BED ITEM NO: Y2103W-336/337 SKU: 314659/314660 314571/314572 Y2103B-336/337 314615/314616 Y2103G-336/337 15 min...
- Page 8 BOX 1- TW HEADBOARD/FOOTBOARD/SLATS PANEL BED PART SKU# IMAGE DESCRIPTION 1994T-A-W:(White) 1994T-A-B:(Blue) Headboard 1994T-A-G:(Grey) 1994T-B-W: (White) Footboard 1994T-B-B: (Blue) 1994T-B-G: (Grey) Slats 1994T-D BOX 2- TW RAILS PANEL BED PART SKU# IMAGE DESCRIPTION 1994T-C-W: (White) 1994T-C-B: (Blue) Rails 1994T-C-G: (Grey)
- Page 9 Hardware List of Luca Twin Panel Bed IMAGE DESCRIPTION Part SKU# 1994T-1(8) Bolts M8*20mm 1994T-2(14) Screws 8#*30mm 1994T-3(1) Allen key 60*22*4mm Note: Screwdriver will be prepared by yourshelf. THE HARDWARE IS LOCATED IN THE PACKING ITEM NOTE: MUST TIGHTEN SCREWS PERIODIACLLY. WITH USE SCREW MAY ENCOME LOOSE CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
- Page 10 Detail view...
- Page 11 STEP 1: Attaching Bolt (1) to Pre-holes on Headboard (A), Footboard (B). Please be noted: "should not tighten bolts" Connecting the hook on Rail (C) to Bolt (1) and fasten again. Pay attention to rail orientation. 1=8 Pcs...
- Page 12 STEP 2: Please fasten slats (D) by screw (2) into corresponding holes. 2=14 Pcs That's it ! You've finished assembling your item. Thank you!