Advertisement
Quick Links
Installation-Parts
Lower Strainer and
Valve Kit
For straining material from a material supply to a pump lower fluid inlet.
Part No. 256653
400 psi (2.8 MPa, 28 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
312770A
Advertisement
Related Manuals for Graco 256653
Summary of Contents for Graco 256653
- Page 1 Lower Strainer and Valve Kit 312770A For straining material from a material supply to a pump lower fluid inlet. Part No. 256653 400 psi (2.8 MPa, 28 bar) Maximum Working Pressure Important Safety Instructions Read all warnings and instructions in this manual.
- Page 2 Warnings Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where applicable.
- Page 3 Parts Parts 256653, Lower Strainer and Valve Kit Apply sealant to all non-swiveling pipe threads. Clean weekly. Ref. Part Description Qty. 122199 VALVE, ball, nickel plated, 3/4 C20487 FITTING, nipple, hex 101078 STRAINER, y 180199 SCREEN, 20 mesh; not shown 118459 FITTING, union, swivel, 3/4 in.
- Page 4 With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.