Installing The Display Assembly; Removing The Display Bezel - Dell P63G Owner's Manual

Installing the display assembly

1 Place the display assembly to align with the screw holders on the chassis.
2 Place the rubber on both sides of the computer.
3 Tighten the screws to secure the display assembly to the chassis.
4 Install the:
a system board
b system fan
c display cable
d power connector port
e palmrest
f keyboard
g memory
h WLAN card
i hard drive assembly
j base cover
k battery
5 Follow the procedure in

Removing the display bezel

1 Follow the procedure in
2 Remove the:
a battery
b base cover
c hard drive assembly
d WLAN card
e memory
f keyboard
g palmrest
h display cable
i system fan
j system board
k power connector port
l display assembly
3 To remove the display bezel:
a Using a plastic scribe, release the display bezel from the bottom of the display assembly [1].
After Working Inside Your computer.
Before Working Inside Your Computer.
Removing and installing components 23