Configuring Sonicos For Wireless Access - SonicWALL SonicPoint N2 Getting Started Manual

This section provides instructions for configuring SonicOS on your SonicWall network security appliance to connect your
SonicPoint N2 to the WLAN zone and manage it as a Layer 2 device. For more advanced configurations, including Layer 3
management of your SonicPoint N2 on a LAN zone, refer to the SonicOS Administration Guide.
• Configuring SonicOS for SonicPoint N2 on page 21
• Verifying SonicPoint operation on page 25
• Troubleshooting tips on page 26
Configuring SonicOS for SonicPoint N2
You only need to complete three simple configuration tasks in SonicOS to prepare your SonicPoint N2 to provide secure wireless
access.
1 Configure the network interface to which the SonicPoint N2 is connected.
2 Configure the WLAN zone for trust and security services.
3 Configure the SonicPoint N2 entry for the desired radio frequency, mode, and authentication type.
Configuring SonicOS for wireless access
SonicWall SonicPoint N2 Getting Started Guide
3
21