Table of Contents
Advertisement
This section provides instructions for configuring SonicOS on your SonicWall network security appliance to connect your
SonicPoint ACi to the WLAN zone and manage it as a Layer 2 device. For more advanced configurations, including Layer 3
management of your SonicPoint ACi on a LAN zone, refer to the SonicOS Administration Guide.
•
Configuring SonicOS for SonicPoint ACi on page 21
•
Verifying SonicPoint operation on page 25
•
Troubleshooting tips on page 26
Configuring SonicOS for SonicPoint ACi
You only need to complete three simple configuration tasks in SonicOS to prepare your SonicPoint ACi to provide secure wireless
access.
1 Configure the network interface to which the SonicPoint ACi is connected.
2 Configure the WLAN zone for trust and security services.
3 Configure the SonicPoint ACi entry for the desired radio frequency, mode, and authentication type.
Configuring SonicOS for wireless access
SonicWall SonicPoint ACi Getting Started Guide
3
21
Advertisement
Table of Contents
