Camera Mount
3.6.3 Audio Tab
The Audio tabbed pane provides the following audio adjustments to your camera microphone
and speaker:
Mute
Input of Listen Pattern
Output of Talking Pattern
2 Mega-pixel PoE / Wireless Fish-Eye IP Camera
3 kinds of format to choose from: Wall, Ceiling and Hi-FPS.
Enable or disable mute function of the camera microphone.
Line In
Plug an audio source device into the Audio-In port of camera.
And its playback volume could be adjusted by moving the
slider to the left to decrease; and to the right to increase the
volume.
Mic In
Connect a microphone to the Audio-In port of camera; be
noted to use an active microphone (normally with power
supplier on microphone) for this application.
Enable or disable Microphone booster function of the
Camera microphone. Enabling this function will amplify the
signal from the microphone jack.
Speaker Out
Built-in speaker's volume could be adjusted by moving the
slider to the left to decrease; and to the right to increase the
volume.
Line Out
47
ICA-8200/ICA-W8200