Planet Networking & Communication ICA-8200 User Manual page 46

The Video tabbed pane lets you perform live adjustments and improvement of the camera
captured video effect relative to the target environment. If you experience difficulty in
implementing the adjusted parameters, it is recommended that you use the default setting by
pressing the Reset button (see figure below) at the back of the camera.
Brightness
Saturation
Contrast
Sharpness
Day/Night Threshold
ICR
Power Frequency
EV Compensation
2D Noise
Wide Dynamic Range
White Balance
2 Mega-pixel PoE / Wireless Fish-Eye IP Camera
The luminance of the captured image apart from its hue or
saturation.
The degree of intensity and purity of a specific color.
The brightness ratio of the lightest to the darkest part of the video
image.
The sharpness of camera.
Set the illumination lux value (5 ~ 100) to auto-trigger the camera
into "day" or "night" mode relative to luminance of the area under
surveillance. When the environment luminance becomes higher
than the set lux value, the camera will auto switch to "day" or
"color" mode. Otherwise, it will remain at "night" or "mono" mode.
User can turn Auto or setting for fix mode. This function is very
useful under low illumination environment.
Frequency of power line: 50 or 60Hz
It can increase or decrease the amount of brightness or darkness
of your image.
It can remove or lower unwanted noise and preserve fine details
and edges.
This function is to provide clear images even under back light
circumstances. The higher "Strength" level will adjust contrast
compensation stronger.
Adjust the white balance according to the environment
46
ICA-8200/ICA-W8200