Related Manuals for Little Folks Furniture STO002
Summary of Contents for Little Folks Furniture STO002
- Page 1 Simple Storage Bookcase Code: STO002 PLEASE READ CAREFULLY & KEEP FOR FUTURE REFERENCE...
-
Page 2: Product Safety
Thank you for buying a piece of furniture Treated properly it should be a faithful servant for years - and we hope you get the same amount of pleasure from it. Before you do please take a few minutes to read these instructions we suggest you carefully unpack everything, lay it out on a clean, flat floor and identify everything on the parts list in these instructions. -
Page 3: Parts List
Parts list Left Side Middle 2 x Back PCS Right Side Base 2 x Shelves Fittings Front Plinth 12 x Dowels 2 x doors 8x Shelf Screws 2 x Side Plinths 12x Cams 2 x Door stops 12x Cam Pins 4 x Screws 4 x Hinges 7 x Bolts... - Page 4 Assembly Top and Base. 12x Cam Pins and a Screwdriver Fit 12x Cam Pins into the smaller holes as shown. base X 12 Fixing the Shelf screws and Dowels 12x Dowels, 8 x Shelf Screws. Insert 12 dowels into the large holes on each end of the panels screw the shelf screws into the middle holes on the middle, left side and right side.
- Page 5 Connect the sides to the Base 12x Cams Note The product is designed to fit one door bottom right and one door top left. Place each side and middle panel onto the base, aligning the cam pins and dowels into their matching holes.
-
Page 6: Plinth Fixing
Fix the top Now lower the top down onto the carcass. Line up the cam pins, wooden dowels and back panels so that the all parts are connected. Rotate the cam pins to tighten the parts together. Plinth fixing 7 x bolts and an Allen key Fix the plinth pieces onto the carcass base using the bolts provided. - Page 7 Locate the Unit Gently lift the carcass into location. Fix the wall strap to the rear of the carcass and connect to the wall. Little Folks Furniture do not supply wall fixings due to the wide ranging differences of wall construction. Warning : This work should only be carried out by a competent person or a professional.
- Page 8 Fit the doors (top left and bottom right) 4 x hinge plates Fix the hinge plates to the carcass sides Slot facing out of the carcass Fit the door stops (top left and bottom right) 2 x door stops and 4 x wood screws Screw both doors stops in place using the pre-defined holes on the carcass...
- Page 9 Fit the doors leafs 4 x hinges Fix the hinges into the large holes on each door and screw in place. Rotate the rear screw to lock the hinge to the hinge plate Rotate the front screw inwards and outwards to adjust the door Adjust the Doors Hinge plate screws for up and down Front screw for in and out...