Pkm KHU-603 Instruction Manual page 37

WARNING! Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
WARNING! Do not damage the wiring in the wall while drilling
NOTICE! At least one assistant is required for installation.
2.3 Installation on a cupboard
1. Specify the position of the appliance at the cupboard according to the drawing
below. Screw 4 supplied screws into the cupboard relevant to the position of
the 4 slots for the screw heads on the appliance. Do not tighten the screws
completely as you have to hang the appliance on the screw heads.
2. Hang the appliance on the screw heads. Insert the screw heads into the round
slots; then move the appliance so that the screw heads are in the narrow section
of the suspension. Tighten the 4 screws to ensure safe and proper positioning.
3. Fix screws through the small safety holes to protect the appliance from
unintended moving.
2.4 Installation on a wall
1. If the cupboard is not suitable for installation, you can carry out a wall
installation. Screw 2 supplied screws into the wall relevant to the position of the
2 slots for the screw heads on the back of the appliance. Do not tighten the
screws completely as you have to hang the appliance on the screw heads.
37