ZURN Sundara Z5005.01 Installation, Operation, Maintenance And Parts Manual

ZURN Sundara Z5005.01 Installation, Operation, Maintenance And Parts Manual

Inlet single basin hand washing system

Advertisement

Sundara
Inlet Single Basin
®
Hand Washing System
All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the date
of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are notified in
writing of such defect and the goods are returned to us prepaid at Atlanta, GA, with evidence that they have been properly maintained and
used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages whatsoever, including
incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the defective goods. Before
installation and use, the purchaser shall determine the suitability of the product for his intended use and the purchaser assumes all risk
and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantability is expressly excluded. If the
products sold hereunder are "consumer products," the implied warranty of merchantability is limited to a period of three years and shall be
limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are approximate and are not guaranteed.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov
NOTE: The information in this manual is subject to change at any time without notice. Installations may
be performed at different times of construction by different individuals. For this reason, these instructions
should be left on-site with the facility or maintenance manager.
NOTE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.
Rev. B | Date: 10/13/2022 | C.N. No. 144818 | Prod./Dwg. No. FV662
Patent zurn.com/patents
US 1.855.ONE.ZURN CANADA 1.877.892.5216
ZURN.COM
Z5005.01
Sundara
®
Hand Washing System
Installation, Operation, Maintenance
and Parts Manual
PATENT(S) PENDING
LIMITED WARRANTY
Inlet Single Basin

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sundara Z5005.01 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZURN Sundara Z5005.01

  • Page 1 For this reason, these instructions should be left on-site with the facility or maintenance manager. NOTE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT. Rev. B | Date: 10/13/2022 | C.N. No. 144818 | Prod./Dwg. No. FV662 Patent zurn.com/patents US 1.855.ONE.ZURN CANADA 1.877.892.5216 ZURN.COM...
  • Page 2 Specifications: Sundara Inlet single basin lavatory system manufactured by Zurn Industries. Lavatory shall be mounted at standard height ® to conform with ANSI, UFAS, TAS and ADA Accessibility Standards. Counter and integral basin to be constructed of Sundara ®...
  • Page 3: Required Tools

    L Brackets Installation Required Tools: Allen Wrench: Torx Wrench: T10 & T25 Electrical 2 [12.7] Outlet Z6950/52/53/54/56-SD Hanger Bracket For ease of installion, lay basin on its top surface on a cush- ioned surface. Install hanger brackets 1/2 inch from front face of L-bracket as shown.** Use socket wrench to torque the screws (approximately 4-5 complete turns bottom out approximately 5 ft-lbs of torque).
  • Page 4: Installing Mounting Bracket

    Soap Dispenser Installation Retrofitting Hanger Bracket Installation Wall Stud Plywood Wall Stud Bolt supplied by Hanger Bracket installer to attach the plywood to Drywall wall studs 1/2” Thick Recommended for retrofit: Plywood Hanger Bracket • Measure the rough in dimensions on the wall. Top edge of the cutout marked must be 2”...
  • Page 5: Shroud Installation

    P Trap Installation & Water Installing with Carrier Option Supply Connection to Faucet Z1240-EZR Carrier System Connect the tail piece to Grid Drain Optional Waste (threaded connection) Line Sleeve (-WL) Then attach P-Trap to tailpiece Warning: Must be handled by at least 2 people Adjust the tail piece base on drain outlet on the wall.
  • Page 6 Repair Instructions: • Zurn recommends that damages should be repaired by certified solid surface fabricator or repair agents. • Blemishes to the basin surface (such as scratches, burnmarks, and minor chipping) can be repaired by sanding with super-fine(800 or 1000 grit) sand paper and/or maroon Scotch-Brite™...

This manual is also suitable for:

Fv662

Table of Contents