NordicTrack Elite 10.9 User Manual page 16

17. Orient the Rear Console Cover (80) as shown,
and attach it to the Upright (4) with two
M4 x 16mm Screws (101).
Next, orient the Front Console Cover (79) as
shown, and press it onto the Rear Console
Cover (80).
18. Attach the Tablet Holder (127) to the Console (7)
with four Tablet Holder Screws (111); start all
the Tablet Holder Screws, and then tighten
them.
19. Make sure that all parts are properly tightened before you use the elliptical. Extra parts may be included.
Place a mat beneath the elliptical to protect the floor.
17
80
18
7
16
79
101
4
127
111