NordicTrack Elite 10.9 User Manual page 13

11. Orient the Right Pedal Arm (58) as shown.
Apply grease to the axle on the Right Pedal
Arm (58).
Attach the Right Pedal Arm (58) to the Right
Roller Arm (59) with an M8 x 20mm Screw (126)
and a Retainer (55); make sure that the flat
side (D) of the Retainer is facing the Right
Roller Arm.
Repeat this step for the Left Pedal Arm (44).
12. Apply grease a Pedal Arm Axle (64).
While a second person holds the front end of
the Right Pedal Arm (58) inside the bracket on
the Right Upper Body Leg (60), insert the Pedal
Arm Axle (64) into both parts from the direction
shown.
Next, slide an M8 x 22mm Washer (77) onto an
M8 x 13mm Screw (82), and tighten the Screw a
few turns into the Pedal Arm Axle (64).
Then, tighten the Pedal Arm Axle (64) and the
M8 x 13mm Screw (82) at the same time.
Repeat this step on the other side of the
elliptical.
11
44
55
D
126
12
46
82
13
59
Grease
58
60
Grease
77
64
58