Machine Is In Rinse Hold Mode; End Of Programme; Your Machine Is Equipped With A; Standby Mode - Beko WMI 71441 User Manual

Operating the product

5.19 Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol
illuminates when the machine is in Rinse Hold
mode.
If you want to spin your laundry when the
machine is in this mode:
Adjust the spin speed and press Start / Pause
/ Cancel button. Pause symbol disappears and
Start symbol appears. Programme resumes,
discharges the water and spins the laundry.
If you only want to drain the water without
spinning:
Just press Start / Pause / Cancel button. Pause
symbol disappears. Start symbol appears.
Programme resumes and discharges the water
only.

5.20 End of programme

"End" appears on the display at the end of
the programme. Symbols of the programme
steps remain lit. Auxiliary function, spin speed
and temperature that were selected at the
beginning of the programme remain selected.
32 / EN
5.21 Your machine is equipped with
a "Standby Mode"
In case of not starting any programme or
waiting without making any other operation
when the machine is turned on by On/Off
button and while it is in selection step or if no
other operation is performed approximately
2 minutes after the programme you selected
has come to an end, your machine will
automatically switch to energy saving mode.
Brightness of indicator lights will decrease.
Also, if your product is equipped with a display
showing the programme duration, this display
will completely turn off. In case of rotating
the Programme Selection knob or pressing
any button, lights and display will restore to
their previous condition. Your selections made
while exiting the energy saving mode may
change. Check the appropriateness of your
selections before starting the programme.
Readjust if necessary. This is not a fault.
Washing Machine /User's Manual