Starting The Programme; Progress Of Programme; Loading Door Lock; Changing The Selections After - Beko WMI 71441 User Manual

Operating the product
1. Press Start / Pause / Cancel button. ":" sign in
the middle of the delayed start time on the
display stops flashing.
2. Start symbol disappears. Pause symbol and
Delayed Start symbol flashes.
3. Decrease the delayed start time by pressing
the Delayed Start - button. Programme
duration appears after 30 minutes.
4. Press Start / Pause / Cancel button to start
the programme.

5.13 Starting the programme

1. Press Start / Pause / Cancel button to start
the programme.
2. Start symbol showing the startup of the
programme will turn on.
3. Loading door is locked and Door Locked
symbol appears on the display.
4. The symbol of the step from which the
programme has started appears on the
display (Prewash, Main Wash, Rinse,
Softener and Spin).

5.14 Progress of programme

Progress of a running programme is indicated
on the display with a set of symbols.
Relevant symbol appears on the display
at the beginning of each programme step
and all symbols remain lit at the end of the
programme. The farthermost right symbol
indicates the current programme step.
Prewash
If the Prewash auxiliary function is selected,
Prewash symbol appears on the display
indicating that the prewash step has started.
Main Wash
Main Wash symbol indicating that the main
wash step has started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step
has started appears on the display.
30 / EN
Softener
Softener symbol indicating that the softener
step has started appears on the display.
Spin
Appears at the beginning of the final spin step
and remains lit during Spin and Pump special
programmes.
C
If the machine does not pass to the
spinning step, Rinse Hold function
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
in the machine.

5.15 Loading door lock

There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
Door Locked symbol appears when the loading
door is locked. This symbol will flash until the
loading door becomes ready to open when
programme completes or the machine is
paused. Do not force to open the loading door
in this step. Symbol disappears when the door
is ready to open. You can open the door when
the symbol disappears.

5.16 Changing the selections after

programme has started

Switching the machine to pause mode
Press the Start / Pause / Cancel button to
switch the machine to pause mode. Pause
symbol appears on the display indicating
that the machine is paused. Start symbol
disappears.
F1 F2
F3
F4
Washing Machine /User's Manual