Cisco 3100 Manual page 12

Front Panel LEDs
1 RJ-45 Copper Port Link Status
• Off—No link.
• Green—Link is up.
3 Management Port Status
The 1/10-Gb fiber management port has a bicolor
LED under the SFP cage that indicates
link/activity/fault:
• Off—No SFP.
• Green—Link up.
• Green, flashing—Network activity.
• Amber—SFP present, but no link.
5 Fiber Port Link/Activity Status
Each fiber port has one dual color LED under the
SFP cage.
• Off—No SFP.
• Green—Link up.
• Green, flashing—Network activity at >1G
• Amber—No link or network failure.
7 Managed Status
• Green, flashing slowly (twice in 5
• Green and amber, flashing—Cloud
• Green—Cloud is disconnected.
Note
Overview
12
is detected.
seconds)—Cloud is connected.
connection failure.
See the Easy Deployment Guide for
1000, 2100, or 3100 Series Cisco
Secure Firewalls for more
information on LTP.
2 RJ-45 Copper Port Activity Status
• Off—No activity
• Green, flashing—The number of flashes
determines the link speed; 1 flash=10 Mb,
2=100 Mb, 3=1 Gb.
4 Factory Reset Button Status
• Green, flashing—Flashes 5 seconds after
you depress the button.
• Off—Reset is complete.
6 Network Module 2 Port Status
• Green—Port is enabled, the link partner is
detected.
• Amber—Port is enabled, but the link partner
is not detected.
• Green, flashing—Port is enabled; network
activity is detected.
8 Alarm Status
• Off—No alarms.
• Amber—Environmental error.
• Green—Status is ok.
Overview