General Operation; Selecting Modes; Adjusting The Volume; Selecting The Equaliser - Logik Sound Stage Instruction Manual

General Operation

When you first connect the unit to the mains socket, the unit will be in Standby mode. The
POWER Indicator will light up red.
• Press the
HELLO and then the last used mode.
• Press the
and then the unit will turn off. The POWER Indicator will light up red.
• Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.
When the unit volume is close to mute or is idle for approximately 15 minutes, it
will automatically switch to Standby.

Selecting Modes

Press the SOURCE Button repeatedly to switch between AUX, BT, MP3 LINK and OPTICAL
mode.

Adjusting the Volume

Press the VOL +/– Button to adjust the volume.
•
If you wish to turn the sound off, press the MUTE Button on the remote control. Press
•
the MUTE Button again or press the VOL +/- Button to resume normal listening.

Selecting the Equaliser

Press the EQ Button on the remote control repeatedly to select a desired music mode.
(DEFAULT, MOVIE, MUSIC, TV).
When AUX or OPTICAL mode is selected, the equaliser will be set to MOVIE.
•
When BT or MP3 LINK mode is selected, the equaliser will be set to MUSIC.
•

Adjusting the Brightness

Press the DIM Button on the remote control repeatedly to select brightness level.
12
Button to switch the unit on. The display will show a greeting message
Button to switch the unit back to Standby. The display will show STANDBY