Using The Mp3 Link Connection; Connecting To The Mains Supply - Logik Sound Stage Instruction Manual

Using the MP3 LINK Connection

Use the 3.5mm to 3.5mm audio cable to connect the audio device's headphone socket to
the unit's MP3 LINK socket.

Connecting to the Mains Supply

• Ensure that the power supply voltage corresponds to the voltage printed on the back
or the underside of the unit.
• This unit is designed to operate with the provided mains cable.
• Connecting the unit to any other power source may damage the unit. Unwind the
mains cable to its full length.
Connect the end of the mains cable to the AC~ Socket at the rear of the unit.
•
• Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted
into the mains socket.
• Ensure all audio connections of the unit are connected before connecting to
the mains power socket.
• Unplug the power cord from the outlet when the unit is not in use for an
extended period of time.
SOURCE / PAIR VOL –
Top view of the unit
To the mains
socket
AC~
VOL +
MP3 LINK
3.5mm to 3.5mm
audio cable
L
R
AUX OPTICAL
Audio device
11