Trane MITSUBISHI ELECTRIC TPEFYP015MH142A Installation Manual page 3

[Fig. 7.1.1]
[Fig. 7.1.2]
A
[Fig. 7.1.4]
A
B
C
E
G
A Cut here
B Remove brazed cap
A Cool by a wet cloth
I
J
K
20
[13/16]
D
20
[13/16]
K
J
F
20
[13/16]
7.1
[Fig. 7.1.3]
A
B
A
D
E
A Thermal insulation tubing 1
(Unit: mm [in])
B Caution:
Pull out the thermal insulation on the refrigerant piping at the site,
braze the piping, and replace the insulation in its original position.
Take care to ensure that condensation does not form on exposed
copper piping.
C Refrigerant piping (liquid)
H
D Refrigerant piping (gas)
E Main body
E
F Thermal insulation tubing 2
G Site refrigerant piping
L
H Ensure that there are no gaps between the insulation and the
20 main body.
[13/16]
I Thermal insulation tubing (small) (accessory) 1
J Tie band (large) (accessory) 4
K Ensure that there is no gap here. Place join upwards.
L Thermal insulation tubing (large) (accessory) 2
C
A Thermal insulation
B Pull out insulation
C Wrap with damp cloth
D Return to original position
E Ensure that there is no gap here
F Wrap with insulating tape
F
3