Rear/Ceiling
Select REAR/CEILING in the OSD menu.
ADVANCED MENU
Correct Picture
Lotus
Adjusting the projector lens
Projector lens adjustment includes focus, zoom, horizontal/vertical picture shift, image corner adjust,
and Warping. Refer to " Page 21 : 7. Adjusting the projector's angle, Lens Shift, Zoom, Lens
Centering, and Focus " and " Page 22 : 8. Correcting the distortion " for detailed instructions.
NOTE:
Trademark acknowledgment
TM
trademarks of HDMI Licensing LLC in the United States and other countries.
TM
and Blu-ray
TM
and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
®
and the DLP logo are registered trademarks of Texas Instruments.
All other trademarks are the properties of their respective owners.
Warranty and after-service
If an abnormal operation (such as smoke, strange odor or excessive sound) should occur, stop using
the projector immediately. Then turn off the power, and contact the dealer or service company.
checks.
If this does not resolve the problem, consult your dealer or service company. They will tell you what
warranty condition is applied.
company.
TM
are trademarks of Blu-ray Disc Association.
Installation of the Projector
31
31
English-
English-