Matrix MS200 Use And Maintenance page 6

Please note:
• This oven has been fitted with a cooling fan to achieve maximum
efficiency and to maintain low surface temperatures. The cooling
fan will switch on automatically when the oven switches on. It
is normal for the cooling fan to run for an hour or more after use,
depending on the duration, temperature and type of cooking
programme used.
• Do not switch off the oven if you have set a programme for
semi-automatic or automatic cooking as this will cancel the
programme.
• You will need to set the time on the electronic programmer
before the functions will begin to work (see page 9).
• You can change the tone of your programmer. To do so, touch
and hold the < and > sensors simulatenously. Then press
menu until 'ton' and a number appears on the display. Use
the < and > sensors to select a new tone. Touch nothing for
approximately 7 seconds and the tone should set.
• IMPORTANT: The programmer goes on standby (dims) after 7
secs of inactivity. It also does this between 22:00 and 06:00.
• You can change the brightness of your programmer's
standby mode. To do so, touch and hold the < and > sensors
simulatenously. Then press menu until 'bri' and a number
appears on the display. Use the < and > sensors to select a
new level between 1 (dullest) and 9 (brightest). Touch nothing
for approximately 7 seconds and the level should set.
6
15 minutes of full grill
30 minutes of fan oven