Removing The Appliance Door - Matrix MS200 Use And Maintenance

IMPORTANT:
• Steam cleaners must not be used when cleaning this
appliance.
• Once care and maintenance is complete, ensure that all parts
are correctly replaced before using the oven.

Removing the appliance door

In order to allow for easier access into the oven cavity for cleaning, it
is possible to remove the door. Before removing the door, ensure that
you have an area prepared in which you can place the removed
door. This area should ideally be protected by something like a
folded, dirt-free, towel to help prevent damage to surfaces and the
door.
• Open the door fully
• Lift and tilt the safety catch part of the hinge (fig. 2) so that it is fully
extended and points towards the door.
• Close the door most of the way, lift it slightly and then pull it, safely
but firmly, towards you.
14
fig. 2