Removing The Inner Door Glass - Matrix MS200 Use And Maintenance

Removing the inner door glass

With the door removed, the inner
glass can also be taken out for
cleaning purposes.
• Use a flathead screwdriver or to
unhook the door slat, as shown
in fig. 5
• Remove the door slat, as per fig.
6, and place it somewhere safe
where it will neither receive nor
cause damage.
• Remove the inner glass from
the blocks it is seated within
(near to the hinges) and place
this somewhere safe also. Pay
attention to the way that the
glass is facing as it will need
to be replaced in the same
direction. The smooth surface
of the glass should be facing
upwards (inwards if the door was
back in place) with the patterned
side facing the oven door
handle.
• Clean the door glass with warm,
soapy water and wipe dry with a
clean microfibre cloth.
• The middle pane of glass can also be removed but it is important
that this pane is reinserted facing the same way that it was when
16
fig. 5
fig. 6