Matrix MS200 Use And Maintenance page 11

To switch on semi-automatic cooking
• Set the desired oven function and temperature.
• Press the menu sensor until the display illuminates the
and the timer display shows 'dur'.
• Set the required cooking time using the timer left and right sensors.
The cooking time that can be set ranges from between 1 minute
and 10 hours. After an approximately 7 second wait, the time will
be set.
• Once the set cooking time has elapsed the set function will be
switched off automatically. An acoustic signal will sound and
the symbol will flash. Press and hold any of the three sensors
in order to deactivate the acoustic signal that sounds once
the minute minder time has elapsed. The timer will then revert to
showing the current time.
• Switch both control knobs to the off position.
To cancel semi-automatic cooking
The semi-automatic function can be cancelled at any time. To do this,
simply press and hold the timer left and right sensors simultaneously.
Automatic cooking
This function allows for a duration and an end time to be set for
cooking. With this, the oven will start cooking automatically due to
the set duration determining how long before the end time that the
function will activate and begin cooking. For example, if you set the
cooking duration to 1 hour, and the end time to 15:30, then the oven will
activate the function at 14:30. When the set time elapses, the oven will
switch the set function off and an acoustic signal will sound.
symbol
11